Converging Systems Integration Resources Crestron Home Page

crestron

Integration Partner Modules-Crestron Home

Device Driver(s) for various lighting (LED) control products and motor control products are currently available from within Crestron Home.

For lighting projects, simply launch the Crestron Home Setup software to load our Platform Driver. If it does not appear from within the Setup software, contact Converging Systems for more information. Excellent bi-directional feedback is now available with our LED lighting control products, including color temperature, Circadian and HSB and alternative RGBW functionality.

Model	Interface	Functions	Sample Screens/Downloads

ILC-x00 LED Controller	e-Node 2000/4000 (IP)	Controls device(s) using IP communication Controls lighting state (ON/OFF) Supports up to 254 ILC-xxx controllers per e-Node/xxxgateway32 DMX Lighting or Fan devices per gateway Controls multiple zone, group, and node (Z.G.N) addresses Enables bi-directional feedback for color states rate Enables automatic of appropriate CH UI regardless of type of fixture supported (mono, bi-white, RGB or full spectrum)	Integration Notes-CH OS 4 Hybrid Environments - Crestron DIN-GWDL and e-Node xxxx in same installation Integration Notes-CH Pre OS 4 (Legacy document)
e-Node/dmx Gateway	e-Node 2100/4100 dmx (IP)	Controls device(s) using IP communication Controls lighting state (ON/OFF) Supports up to 32 DMX Lighting or Fan devices per gateway Controls multiple zone, group, and node (Z.G.N) addresses Controls setup, dissolve rates Enables bi-directional feedback for color states rate Enables automatic of appropriate CH UI regardless of type of fixtgure supported (mono, bi-white, RGB or full spectrum) Supports Fans and outdoor fixtures using Lighting SDK	Integration Notes-CH OS 4 Hybrid Environments - Crestron DIN-GWDL and e-Node xxxx in same installation Integration Notes-CH Pre OS 4 (Legacy document)
IMC-100 Single Motor Controller	e-Node (IP)	Controls motor direction (up,down, and stop) Controls intermediate presets Controls multiple zone, group, and node (Z.G.N) addresses *Enables bi-directional feedback for motor location	Integration Notes Module Download-V2.0
IMC-300 (CVM) Triple Motor Controller	Built-in IP (e-Node)	Controls two separate motors digitally with up,down, and stop controls Controls third motor (traditionally a door motor) with up and down controls Controls multiple zone, group, and node (Z.G.N) addresses Controls multiple CVM addresses (units 1-4) Controls up top 24 presets of multiple motors *Enables bi-directional feedback for motor location (MKII) Hybrid driver--also includes LED lighting functionality for devices plugged into CS-BUS	Integration Notes Module Download-V2.0

Model

Interface

Functions

Sample Screens/Downloads