Power Supply Overview/Mounting/Importance of Grounds
This section details important information regarding the selection of UL approved Power supply Units (PSU) and integration with ILC-xxx controllers, applicable housings and Class 1 wiring integration.:
Class 2 Approved Power Supplies
| CSI PN | Rating | Mounting Configuration | Application |
|---|---|---|---|
| 21-1024-240 | 24v/96 watts | DIN-RAIL | ILC-x00 Constant Voltage Controllers |
| 21-1024-240 | 24v/96 watts | DIN-RAIL | ILC-450 Constant Current Controller |
| 21-1048-480 | 48v/96 watts | DIN-RAIL | ILC-450 Constant Current Controller |
Mounting Considerations/Importance of Grounds
Selection of DIN rail enclosure/information regarding the placement of UL Class 2 approved Power supply Units (PSU).
- Selection of DIN-Rail Enclosures.
Please refer to this separate document for images showing Class 1 wiring run to power strips and then dealer-installed Class 2 installation of the ILC-xx0 and associated components.
- The importance of running Grounds to all ILC-xx0 controllers.
Verify that a known good earth ground is connected to each ground pin on the 3-pin green power connector to each ILC-xx0 device. Correct as necessary.