Permitted Bends of FLLA Linears?
- Where can Linears be cut?
In general, if the e-Node's indicator continues flashing 2x per second GREEN after a reboot, this indicates network wiring, network switch, network router or crimping issues with LAN cables. Try another port on your router/switch with another known good network cable. If you are using the e-Node 4x00 device with POE, try substituting a 12v wall wart and disconnect the device from a powered POE port (simply adding a wall-wart without disconnecting the e-node from a powered POE switch will not remove the POE component from the equation that we are testing).
- If there is a leader cable on the front end and back end of every FLLA linear that is 16.4' long, how do I created a new connection if I cut the strip into three pieces.