• Controls Motor and LED device(s) using IP communication/LEAP Integration
• Tracks Lutron Keypad button presses and Monitors real and phantom Loads connected to Lutron dimmers, sensors and timeclock events
• Controls lighting state (ON/OFF)
• Controls lighting presets (P1-P24)
• Controls lighting effects (Effect #1,#2)
• Controls multiple zone, group, and node (Z.G.N) addresses
• Controls setup, dissolve rate and sequence rate
• Ability to utilize the "store" feature on Lutron keypads to store presets on CSI devices (without having to dedicate a separate button for this function). Note: same Lutron button can be used then for recalling a lighting preset and/or storing a new lighting preset
• Controls setup, dissolve rate and sequence rate.
• Controls Saturation, Hue, Fade, Color Temperature with Lutron APP sliders
• Controls Corelated Color Temperature (CCT) with discrete buttons (1800K to 7000K)
• Can track colar Circadian output on ILC-xxx controllers
• Controls motor state (UP/DOWN/STOP)
• Controls motor presets (P1-P24)
• Can be controlled from Lutron's APP (iOS and Android)

Quick Start Guide/Basic Overview-Homeworks QSX

Quick Start Guide/User Interfaces and Load Tracking Programming-Homeworks QSX

Lutron RadioRA3 User Interface Primer (for Color Devices)

Circadian Tracking Tech Note-Homeworks QSX

Integration Notes-Long Version (for New Web-Pilot Application)

Lutron Keypad Reference Chart

Troubleshooting Connectivity Issues (between e-Node and Lutron LEAP processors)

FAQ--Lutron

• Controls lighting state (ON/OFF)
• Controls lighting presets (P1-P24)
• Controls lighting effects (Effect #1,#2)
• Controls multiple zone, group, and node (Z.G.N) addresses
• Controls setup, dissolve rate and sequence rate
• Controls Saturation, Hue, Fade, Color Temperature with Lutron application sliders
• Controls Corelated Color Temperature (CCT) with discrete buttons (1800K to 7000K)
• Enables "Saving" feature with double click of Lutron button.
• Can be controlled from Lutron's Home Control+ application

Integration Notes (for MKII enodes and e-Pilot application)

Sample Essentials Project

Lutron Keypad Reference Chart

e-Node Project File (associated with above Essentials Project File)

• Controls lighting state (ON/OFF)
• Controls lighting presets (P1-P24)
• Controls lighting effects (Effect #1,#2)
• Controls multiple zone, group, and node (Z.G.N) addresses
• Controls setup, dissolve rate and sequence rate
• Ability to utilize the "store" feature on HomeWorksQS keypads to store lighting presets on ILC-100 devices (without having to dedicate a separate button for this function). Note: same Lutron button can be used then for recalling a lighting preset and/or storing a new lighting preset
• Controls setup, dissolve rate and sequence rate.
• Controls Saturation, Hue, Fade, Color Temperature with Lutron application sliders
• Controls Corelated Color Temperature (CCT) with discrete buttons (1800K to 7000K)
• Can be controlled from Lutron's Home Control+ application

Integration Notes (for New Web-Pilot Application)

Sample Lutron Designer Project

Lutron Keypad Reference Chart

e-Node Project File (associated with above Project File)

• Controls motor direction (up,down, and stop)
• Controls intermediate presets (IMC-100T)
• Controls multiple zone, group, and node (Z.G.N) addresses
• Ability to utilize the "store" feature on HomeWorksQS keypads to store motor position presets on supported motor control products(without having to dedicate a separate button for this function). Note: same Lutron button can be used then for recalling a motor preset and/or storing a new motor preset
• Can be controlled from Lutron's Home Control+ application

Quick Start Guide-Homeworks QSX

Integration Notes (for New Web-Pilot Application)

Sample Lutron Designer Project File

Lutron Keypad Reference Chart

e-Node Project File (associated with above Designer Project File

• Controls motor direction (up,down, and stop)
• Controls intermediate presets (IMC-100T)
• Controls multiple zone, group, and node (Z.G.N) addresses
• Ability to utilize the "store" feature on HomeWorksQS keypads to store motor position presets on supported motor control products(without having to dedicate a separate button for this function). Note: same Lutron button can be used then for recalling a motor preset and/or storing a new motor preset
• Can be controlled from Lutron's Home Control+ application

Integration Notes (for New Web-Pilot Application)

Sample Lutron Designer Project File

Lutron Keypad Reference Chart

e-Node Project File (associated with above Designer Project File

• Controls lighting state (ON/OFF)
• Controls lighting presets (P1-P24)
• Controls lighting effects (Effect #1,#2)
• Controls multiple zone, group, and node (Z.G.N) addresses
• Controls setup, dissolve rate and sequence rate
• Enables "Saving" feature with double click of Lutron button
• Controls setup, dissolve rate and sequence rate.
• Controls Saturation, Hue, Fade, Color Temperature with Lutron application sliders
• Controls Corelated Color Temperature (CCT) with discrete buttons (1800K to 7000K)
• Can be controlled from Lutron's Home Control+ application

Integration Notes

e-Node Project File (associated with Lutron Project File)

• Controls motor direction (up,down, and stop)
• Controls intermediate presets (IMC-100T)
• Controls multiple zone, group, and node (Z.G.N) addresses
• Ability to utilize the "store" feature on HomeWorksQS keypads to store motor position presets on supported motor control products(without having to dedicate a separate button for this function). Note: same Lutron button can be used then for recalling a motor preset and/or storing a new motor preset
• Can be controlled from Lutron's Home Control+ application

Integration Notes

e-Node Project File

• Controls device(s) using Lutron TVI (0-10V DC dimmable ballast interface).Compatibility with Graphix Eye 3100/3500 GRX systems and compatible Grafik Eye keypads
• Controls lighting state (ON/OFF)
• Controls lighting presets (P1-P24)

Integration Notes

e-Node Project File