IMC-PM-SW Programming Tool

for IMC Series Controllers

The IMC-PM-SW is an application software utility designed to run on Windows systems (Windows 95/98/2000/XP). This generalized utility is optimized to set up and enable advanced parameter programming on IMC series controllers. Typically, most programming and linking IMC Controllers with keypads, IR devices, RF devices, and IP devices is automatic and does not need an external programming tool. However, in the cases where multiple zones (beyond 6) or where multi-stop programming of IMC Controllers is required, the IMC-PM-SW tool provides an easy way to quickly program Controllers.

Typically desktop and laptop computers today do not support RS-485 communication standards which is provided by the IMC Controllers and therefore an RS-232C to RS-485 converter is required in order to enable control of IMC Controllers from PCs.  The IMC-BC-232/485 Converter can be used for this purpose.

FEATURES

• Easy Installation--Small application utility that auto-installs on Windows systems to enable advanced programming of IMC Controllers.

• Bi-directional Communication. System allows feedback of status of any connected IMC Controllers.

• RS-232C/RS-485 Drivers. Software is optimized to route signals using computers RS-232C or RS-485 ports (or external RS-232C to RS-485 converters). 

• Configurable. (TBD).

• Plug-N-Play. No additional software or driver required.

Back to Info by Category

Instruction Manual

Printable Catalog Page

Specifications