IMC-SIR-D Standalone IR Receiver 

for IMC-series Controllers

The  IMC-SIR-D Standalone IR Receiver assembly is a small format networkable IR receiver for IMC-series Controllers. The IMC-SIR-D utilizes a RS-485 control interface with a customized command set to control up to 65,025 Controllers uniquely or in groups or zones. This bus interface known as the "CS" bus can be used to connect any number of IMC-SIR-D standalone IR receivers to enable remote IR control of any number of controllers from a single controller to entire groups or zones of motor controllers. Bus length of up to 4,000 feet can be specified for innovative installations. This configuration is ideal for situations where an IR receiver cannot be installed either as a linkable option to an IMC-series controller or where a remote IR receiver needs to be placed more than 10 feet from an IMC-series Controller.

This attractive single gang Decora insert plate allows convenient installation within standard Decore faceplates.

FEATURES

• Single Gang Decora IR receiver customized for use with IMC-series Controllers.

• RS-485 bus connectivity ("CS") allows for placement of an IR receiver at locations remote from an IMC-series Controller (more than 10 feet).

• Two (2) RJ-11 connectors mounted on back of faceplate allow connection into CS bus anywhere within network.

• Self-powered. Does not need separate electrical connection other than network connection.

Back to Info by Category

Instruction Manual

Printable Catalog Page

Specifications