dropshadow

Select the appropriate document from the list on the right and download to your computer

Integration Partner Modules-RTI

Latest update: September 8, 2014

 

Device Driver(s) for lighting (LED) control products have been created by the engineering team at RTI as Certified Drivers. In addition, derivatives of these Drivers will be made available for our various motor control platforms. When these drivers are available, links to download locations will be provided. In the interim please note that device drivers can be written by RTI authorized dealers by utilizing the technical manual found within the Programming Kits section on this site and the "Raw CMD" function available within Integration Designer and the RTI Driver written for the ILC controller appearing below..

It is anticipated that specific device drivers in the following categories will become available. Download the file, unzip and click on the executable.

Model Functions Sample Screens / Downloads

IMC-100 (via IBT-100 serial interface)

Single Motor Controller

Controls device(s) using RS-232-C communication.

Controls motor direction (up,down, and stop).

Controls intermediate presets (IMC-100T).

Controls multipe zone, group, and node (Z.G.N) addresses.

Controls setup, browse, and help menus.

Integration Notes


RTI Driver


Sample Integration Designer System File

ILC-100 (via IBT-100 serial interface)

LED Lighting Controller

Controls device(s) using RS-232-C communication.

Controls lighting state (ON/OFF).

Controls lighting presets (P1-P24).

Controls lighting effects (Effect #1).

Controls multipe zone, group, and node (Z.G.N) addresses.

Controls setup, dissolve rate and sequence rate.

Integration Notes


RTI Driver


Sample Integration Designer System File

IMC-100 (via eNode-Ethernet Adapter)

Single Motor Controller

Controls device(s) using UDP communication over Ethernet.

Controls motor direction (up,down, and stop).

Controls intermediate presets.

Controls multiple zone, group, and node (Z.G.N) addresses.

Controls setup, browse, and help menus.

Integration Notes


RTI Driver


Sample Integration Designer System File

ILC-100 (via eNode Ethernet Adapter)

LED Lighting Controller

Controls device(s) using UDP communication over Ethernet.

Controls lighting state (ON/OFF).

Controls lighting presets (P1-P24).

Controls lighting effects (Effect #1).

Controls multipe zone, group, and node (Z.G.N) addresses.

Controls setup, dissolve rate and sequence rate.

Integration Notes


RTI Driver


Sample Integration Designer System File

BRIC (via built-in serial interface)

3-motor Master Controller System

Controls device using built-in RS-232-C communication.

Controls two separate motor digitally with up, down,and stop controls.

Controls third motor (traditionally a door motor) with up and down controls.

Controls multipe BRIC addresses (unit 1-4).

Controls up to 8 preset multi-motor presets.

Integration Notes


RTI Driver


Sample Integration Designer System File

BRIC (via external e-Node processor)

3-motor Master Controller System

Controls device using external e-Node processor.

Controls two separate motor digitally with up, down,and stop controls.

Controls third motor (traditionally a door motor) with up and down controls.

Controls multipe BRIC addresses (unit 1-4).

Controls up to 8 preset multi-motor presets.

Integration Notes


RTI Driver


Sample Integration Designer System File