We specialize in bringing high-technology products to solve key marketing challenges.

DIM-2

Device Insertion Module for CS-Bus-2 port

Easy Solution to Split CS-Bus for In-Line Accessories

Simple splitter which permits CS-Bus accessories with only one RJ connector to be used in middle of the CS-Bus rather than just at one end or the other. Unit fits perfectly on back of BSKP keypad and still enables keypad to be mounted in single gang J-Box.

Enables All Signals of CS-Bus to be Split

Typical splitters for RJ connectors reverse the wires for standard telephony requirements. This splitter does not reverse any signals which would be harmful to reliable CS-Bus communication. (Do not try to use an off-the-shelf splitter or your CS-Bus will malfunction.)

Specifications

DIM-2 Specification
Product Code:	DIM-2
FEATURES
Function:	CS-Bus splitter that permits CS-Bus accessories without two RJ ports to be inserted at locations on the CS-Bus other than at one end or the other.
IR input adapter	Convenient device for enabling two powered devices such as the remote IR (R-IR) and the IBT-100 to share the same powered port on an IMC-100 or ILC-100
CONTROLS/INTERFACES
Control Type	None--passive device
IR Input:	Convenient device for ins
Bus Specification	CS-Bus compatible
CONNECTIONS
Network Connection	One Male (6C6P) split into two female (6C6P) jacks
GENERAL
Form Factor	Small form factor to be installed on back of BSKP keypad
Power Consumption:	None
Dimensions:	28.00mm x 36.09mm × 21.78mm
Weight:	11g
Manufacturing	Made in China
COMPLIANCE
Safety Approvals:	N.A