Device Driver(s) for various lighting (LED) control products are currently available from Key Digital.
Simply launch your Compass Navigator PC Software V. XXX or later and download the specified driver (see name below). Current versions will provide LED feedback on keypads and control from touchscreens. Contact Key Digital for more information..
Note: If any sample proejcts are provided below, they are in .zip format. Download the file, unzip and open as a new project..
| Model |
Functions |
Sample Screens / Downloads |
IMC-100 (via IBT-100 serial interface)
Single Motor Controllers
|
Controls device(s) using RS-232-C communication.
Controls motor direction (up,down, and stop).
Controls intermediate presets (IMC-100T).
Controls multipe zone, group, and node (Z.G.N) addresses.
Controls setup, browse, and help menus.
Enables bi-directional feedback for motor position (WIP)
|
Integration Notes
Module Name
Sample Project
|
ILC-100 (via IBT-100 serial interface)
LED Lighting Controller
|
Controls device(s) using RS-232-C communication.
Controls lighting state (ON/OFF).
Controls lighting presets (P1-P24).
Controls lighting effects (Effect #1,#2).
Controls multipe zone, group, and node (Z.G.N) addresses.
Controls setup, dissolve rate and sequence rate.
Enables bi-directional feedback for color state.
|
Integration Notes
Module Name--eNode CS Bus
Sample Project
Key Digital Video Overview--be patient MP4 download
|
IMC-100 (via eNode-Ethernet Adapter)
Single Motor Controllers
|
Controls device(s) using Telnet UDP communication over
Ethernet (Port 23).
Controls motor direction (up,down, and stop).
Controls intermediate presets.
Controls multipe zone, group, and node (Z.G.N) addresses.
Controls setup, browse, and help menus.
Enables bi-directional feedback for color state.
Enables bi-directional feedback for motor position (WIP)
|
Integration Notes
Module Name
Sample Project
|
ILC-100 (via eNode-Ethernet Adapter)
LED Lighting Controller
|
Controls device(s) using Telnet communication over Ethernet (Port 23).
Controls lighting state (ON/OFF).
Controls lighting presets (P1-P24).
Controls lighting effects (Effect #1, #2).
Controls multipe zone, group, and node (Z.G.N) addresses.
Controls setup, dissolve rate and sequence rate.
Enables bi-directional feedback for color state.
|
Integration Notes
Module Name--eNode CS Bus
Sample Project
Key Digital Video Overview--be patient MP4 download
|
|
BRIC (via built-in serial interface)
3-motor Master Controller System
|
Controls device using built-in RS-232-C communication.
Controls two separate motor digitally with up, down,and stop controls.
Controls third motor (traditionally a door motor) with up and down controls.
Controls multipe BRIC addresses (unit 1-4).
Controls up to 8 preset multi-motor presets.
|
Integration Notes
Module Name
Sample Project
|
|
BRIC (via external e-Node interface)
3-motor Master Controller System
|
Controls device using built-in RS-232-C communication.
Controls two separate motor digitally with up, down,and stop controls.
Controls third motor (traditionally a door motor) with up and down controls.
Controls multipe BRIC addresses (unit 1-4).
Controls up to 8 preset multi-motor presets.
|
Integration Notes
Module Name
Sample Project
|
