Device Driver(s) for various motor and lighting (LED) control products have been created by various contributors to Universal Remote. When these drivers are available, links to download locations will be provided. In the interim please note that device drivers can be written by Universal Remote authorized dealers by utilizing the technical manual found within the Programming Kits section on this site..
It is anticipated that specific device drivers in the following categories will become available. Download the file, unzip and click on the executable.
| Model |
Functions |
Sample Screens / Downloads |
IMC-100 (via IBT-100 serial interface)
Single Motor Controllers
|
Controls device(s) using RS-232-C communication.
Controls motor direction (up,down, and stop).
Controls intermediate presets (IMC-100T).
Controls multipe zone, group, and node (Z.G.N) addresses.
Controls setup, browse, and help menus.
|
Sample Screens
Module (TBD K)
[Date Code: TBD] |
ILC-100 (via IBT-100 serial interface)
LED Lighting Controller
|
Controls device(s) using RS-232-C communication.
Controls lighting state (ON/OFF).
Controls lighting presets (P1-P8).
Controls lighting effects (Effect #1).
Controls multipe zone, group, and node (Z.G.N) addresses.
Controls setup, dissolve rate and sequence rate.
|
Sample Screens
Module (TBD K)
[Date Code: TBD]
|
IMC-100 (via eNode-Ethernet Adapter)
Single Motor Controllers
|
Controls device(s) using UDP communication over Ethernet.
Controls motor direction (up,down, and stop).
Controls intermediate presets.
Controls multipe zone, group, and node (Z.G.N) addresses.
Controls setup, browse, and help menus.
|
Sample Screens
Module (TBD K)
[Date Code: TBD] |
|
ILC-100 (via eNode Ethernet Adapter)
LED Lighting Controller
|
Controls device(s) using UDP communication over Ethernet.
Controls lighting state (ON/OFF).
Controls lighting presets (P1-P8).
Controls lighting effects (Effect #1).
Controls multipe zone, group, and node (Z.G.N) addresses.
Controls setup, dissolve rate and sequence rate.
|
Sample Screens
Module (TBD K)
[Date Code: TBD] |
|
BRIC (via built-in serial interface)
3-motor Master Controller System
|
Controls device using built-in RS-232-C communication.
Controls two separate motor digitally with up, down,and stop controls.
Controls third motor (traditionally a door motor) with up and down controls.
Controls multipe BRIC addresses (unit 1-4).
Controls up to 8 preset multi-motor presets.
|
Sample Screens
Module (TBD K)
[Date Code: TBD]
|
