dropshadow

We specialize in bringing high-technology products to solve key marketing challenges.

IMC-300sfs/IMC-301sfs

Intelligent Networkable AC Motor Controller w/ Screen Trigger Interface & 2 dry contact inputs

 

The Intelligent Motor Controller IMC-300sfs™ (trade named "BRIC") is a state-of-the art triple motor bi-directional communication AC motor controller proprietary to Stewart Filmscreen Corporation. This unique controller is designed to control motors such as those used in projection screens, projector lifts, conference room cameras, and other equipment requiring accurate deployment. The device integrates accurate sensitive motor positioning technology that can be used to store and recall the position of up to six motors. This is particularly useful for masking/projection screen systems where presets for specific viewing aspects ratios are desired.

 

Easy Customization

The controllers embedded operating permits virtually any motor control configuration to be programmed on the factory floor without the use of computers or other programming tools. This saves on the number of potential SKUs needed for nearly all types of automation requirements.

 

 

 

Robust Design/Commercial Grade

The engineering team at Converging Systems has been designing and manufacturing motor control technology for over 30 years for most of the world's printer and copier manufacturers. The same commercial grade technology forms the foundation for the IMC-300sfs!

 

Connectivity Flexibility

The IMC-300sfs can be interfaced a myriad of control options including intelligent keypads, dry contact closures, and screen trigger interfaces. In addition connectivity with third-party automation systems including those which support RS-232-C connectivity as well as Ethernet (IP) connectivity is possible. A range of options exist to handle virtually any connectivity requirement.

 

Advanced Control with iPhone and iTouch-type products

Industry standard wireless devices can also be as user interface solutions. Simply wire in the IQA-eNODE Ethernet gateway and connect to any existing Ethernet network with wireless Access Point, and any wireless device can directly control the IMC-300sfs.

 

 

Specifications
IMC-300sfs Family Specifications
Product Code: IMC-300sfs (120vAC); IMC-301sfs (220-240vAC)
FEATURES  
Function: Triple Motor Controller (AC) Bidirectional Bus
Connectors: Line Voltage and Category II connectors
Inputs (triggers):: Screen Trigger Interface 1V-30Vdc ,10ma@12vdc typical
Additional Inputs Two channel (common plus two inputs) dry contact inputs
IR input On-board IR connector for R-IR connection. In addition, IR signals can be received through BSKP-2110-B keypad connected on BRIC communication bus.
CONTROLS/INTERFACES  
Ethernet Connectivity Thru CS-Bus to (external e-Node)
External Keypad Control Thru CS-Bus to (BSKP-keypad family)
Power Connector: Detachable Power Connector for AC input
Motor Control:

Up to three 1/3 hp (2.1) amp bi-directional AC motor (2 directions) can be connected to each IMC-300sfs. Additional motors can be interfaced to additional IMC-300sfs controllers and connected together with a bus connection system
CONNECTIONS  
Control: CS-Bus connectivity
AC motor Connection Three bi-directional motor connectors
Motor Encoder Connection Digital encoders from each motor are directly connected to provide accurate positioning information
Power Consumption: to 5A @ 120VAC; 9A @ 230VAC
GENERAL  
Safety Approvals: ETL Approval to UL 325
EMI Testing: FCC Class B (home and office)
COMPLIANCE  
Dimensions: 155.5845mm × 101.74mm × 35.8mm
Weight: 368 g
Manufacturing Made in the USA