LO-P

Combination Mounting Bracket/Paddle Switch for IMC-100™ Controllers

The Linkable Option-P (LO-P) is an ingenious dual purpose mounting bracket/two position paddle switch (up,down, on,off, etc.) for the the IMC-100 family of intelligent motor controllers. A quick-mount system allows the LO-P to be quickly attached to the IMC-100 controller so that the set can be mounted into a single gang outlet box. The mounting kit is ETL approved to UL 325 and enables an IMC-100 to have a two position user interface conveniently located for the user without needing to add another switch box into the installation.

Built-in 2-Position Switch

The LO-P is an easy way to add a two-position switch to any IMC-100 controller. Simply plug in kit into front of IMC-100 and a two-position switch is immediately available for one or more IMC-100 controllers. Software tools permit customization of switch addressing to enable received signals to control the attached IMC-100 or any number of additional CS-bus compatible controllers anywhere on the CS-Bus.

Easy J-Box Installation

Small format mounting bracket enables IMC-100 to be mounted in nearly any plastic or metal single gang J-boxes (or larger). The included Decora mounting plate serves a dual purpose function by finishing the installation and providing a protective cover plate for the electronics and the switch.

Safety Agency Approval for J-Box installation.

This mounting option is a safety agency approved method for mounting the IMC-100 into a J-box. When properly installed, low-voltage and line-voltage wires enter the J-Box with appropriate separation to achieve approval under UL 325.

Attractive Decora® Mounting Plate

An attractive Decora® single gang faceplate complements the installation. The Decora® plate goes with any decor.